ConstructionConverter

Shingle & Roofing Squares Calculator

Enter a roof's rise and run for its pitch, angle and percent slope. Then enter the footprint for the actual roof area, roofing squares and shingle bundles, with the pitch included.

Roof pitch from rise and run

Enter the rise and run in the same unit, inches or feet, for the pitch, angle and percent slope.

Roofing squares and shingle bundles

Enter a flat footprint or a number of squares, plus the pitch, for the actual roof area and the bundles to buy.

A roof pitch triangle labeled rise and run, showing how a steeper pitch increases actual roof surface area versus flat footprint run = 12 rise roof slope × multiplier 100 sq ft = 1 square

Your roof pitch

Rise
4.5
Run
6

Roof pitch

9/12 pitch

Roof angle
36.87°
Percent slope
75%
Pitch multiplier
×1.250

Estimate only, worked out from the inputs shown. Confirm the order with your supplier; for slabs, posts, footings or a roof, check local building code and a licensed contractor.

Assumptions

  • Pitch = rise ÷ run × 12, written as rise per 12 of run. Enter rise and run in the same unit.
  • Roof angle = arctangent of rise ÷ run. Percent slope = rise ÷ run × 100.
  • Pitch multiplier = √(pitch² + 12²) ÷ 12. Multiply a flat footprint by it to get the actual sloped roof area.
  • Shingle slope limits as of 2026-09; your shingle maker's instructions and local code have the final say.

Estimate squares and shingle bundles at this pitch →

Roof pitch chart

Common pitches with their angle, percent slope and multiplier, worked out with the same math as the calculator.

Pitch Angle Percent slope Multiplier
2/12 9.46° 16.67% ×1.014
3/12 14.04° 25% ×1.031
4/12 18.43° 33.33% ×1.054
5/12 22.62° 41.67% ×1.083
6/12 26.57° 50% ×1.118
7/12 30.26° 58.33% ×1.158
8/12 33.69° 66.67% ×1.202
9/12 36.87° 75% ×1.250
10/12 39.81° 83.33% ×1.302
11/12 42.51° 91.67% ×1.357
12/12 45° 100% ×1.414

Roofing squares and shingle bundles by roof size and pitch

Find your flat roof footprint on the left and your pitch along the top. Each cell is the sloped roof area in squares and the bundles to buy at 3 bundles a square plus 10% waste, worked out with the same math as the calculator.

Footprint 4/12 6/12 8/12 10/12 12/12
1,000 sq ft 10.54 sq
35 bundles
11.18 sq
37 bundles
12.02 sq
40 bundles
13.02 sq
43 bundles
14.14 sq
47 bundles
1,500 sq ft 15.81 sq
53 bundles
16.77 sq
56 bundles
18.03 sq
60 bundles
19.53 sq
65 bundles
21.21 sq
71 bundles
2,000 sq ft 21.08 sq
70 bundles
22.36 sq
74 bundles
24.04 sq
80 bundles
26.03 sq
86 bundles
28.28 sq
94 bundles
2,500 sq ft 26.35 sq
87 bundles
27.95 sq
93 bundles
30.05 sq
100 bundles
32.54 sq
108 bundles
35.36 sq
117 bundles
3,000 sq ft 31.62 sq
105 bundles
33.54 sq
111 bundles
36.06 sq
119 bundles
39.05 sq
129 bundles
42.43 sq
141 bundles

For a simple gable or shed roof. Hips, valleys and dormers add area and waste, and the footprint includes the eave overhangs.

Measuring a roof without climbing on it

You don't need to get on the roof to estimate shingles. Measure the outside walls with a tape, then add the eave and rake overhang on each side, since the shingles run out to the drip edge. A house whose walls measure 40 × 30 ft with a 1 ft overhang all round has a footprint of 42 × 32 = 1,344 sq ft. Get the pitch from the attic or a pitch gauge app held on a rake board, then enter both numbers in the calculator above.

Roofs with more than one pitch

A steep main roof with a shallow porch or shed addition can't share one multiplier. Measure each section's footprint, convert each at its own pitch, then add them. In this worked example the main house covers 1,400 sq ft at 6/12 and a porch covers 300 sq ft at 3/12:

  • Main roof: 1,400 × 1.118 = 1,565 sq ft, or 15.65 squares.
  • Porch: 300 × 1.031 = 309 sq ft, or 3.09 squares.
  • Together: 18.74 squares, or 62 bundles with 10% waste.

The porch is below 4/12, so most shingle makers want extra underlayment there, and anything under 2/12 needs a low-slope roofing product instead of shingles.

What this calculator does

The first form turns a rise and run into a pitch, an angle and a percent slope. The second converts between a roof's flat/plan footprint (what you'd measure from a site plan or by walking the footprint on the ground) and its actual sloped surface area in roofing squares, the unit shingles and roofing materials are sold by, and estimates the shingle bundles a job needs.

How the math works

  • Pitch: rise ÷ run × 12, written as rise per 12 of run.
  • Roof angle: the arctangent of rise ÷ run.
  • Percent slope: rise ÷ run × 100.
  • Pitch multiplier: √(rise² + 12²) ÷ 12, where rise is the pitch's rise per 12 in of run.
  • Flat → actual area: flat/plan sq ft × pitch multiplier.
  • Roofing squares: actual sloped sq ft ÷ 100.
  • Shingle bundles: squares × 3 bundles/square × 1.10 waste allowance, rounded up.

Why not just use a generic area converter?

A generic converter treats square feet as square feet. It has no idea a roof's real surface area is larger than its footprint once you account for slope, and ignoring pitch makes a DIY roofing estimate come up short. This tool applies the actual pitch-triangle math and shows the multiplier it used.

Hips, valleys and the materials the bundle count leaves out

  • Hip roofs. When every face slopes at the same pitch, footprint × multiplier still gives the right total area. The difference is waste: shingles get cut at an angle along each hip, so allow about 15% rather than 10%.
  • Valleys, dormers and cut-up roofs. Each valley and dormer means more cutting and more flashing. Roofs with several of them often run 15 to 20% waste, and a dormer's own small roof should be measured as a separate section.
  • Starter strip and ridge cap. These are sold by linear feet, not squares. Add up the eave and rake edges for starter, and the ridges and hips for cap. On a plain 42 ft gable that is about 84 ft of eave and 42 ft of ridge.
  • Underlayment, drip edge and nails. Underlayment is sold in rolls rated by the squares they cover, and drip edge in 10 ft lengths around the perimeter. Neither is in the bundle number.
  • Heavier shingles. Some heavy designer shingles pack 4 or 5 bundles to the square instead of 3. Use the squares figure and the coverage on the wrapper of the shingle you buy.
  • Tear-off. The squares figure also sizes the dumpster and labor for removing the old roof, and each extra layer of old shingles adds to both.

Worked examples

Two roofs taken from footprint to squares and bundles by the roofing calculator here. Open one to rerun it with your own pitch.

A shed roof that climbs 4.5 ft over a 6 ft run

Rise ÷ run × 12 gives the pitch; the angle is the arctangent of rise ÷ run. Rise and run just need the same unit.

  • Roof pitch: 9/12 pitch
  • Roof angle: 36.87°
  • Percent slope: 75%
  • Pitch multiplier: ×1.250
Run this example →

A 2,200 sq ft roof footprint at an 8/12 pitch

Footprint × the pitch multiplier gives the sloped area; ÷ 100 for squares; squares × 3 bundles + 10% waste, rounded up.

  • Roofing squares needed: 26.441 roofing squares
  • Actual roof area: 2,644 sq ft
  • Pitch multiplier: ×1.202 (8/12 pitch)
  • Shingle bundles: 88 (3/square + 10% waste)
Run this example →

Frequently asked questions

How do you calculate roof pitch?

Divide the rise by the run and multiply by 12. A roof that climbs 4 ft over a 12 ft run is 4 ÷ 12 × 12 = 4, so it has a 4/12 pitch. The answer is written as rise per 12 of run: a 4/12 roof rises 4 inches for every 12 inches it runs.

How do you measure roof pitch?

In the attic, hold one end of a level against the underside of a rafter and keep it horizontal. From the 12-inch mark on the level, measure straight up to the rafter. That number is the rise, so 6 inches means a 6/12 pitch. Working from the attic keeps you off the roof.

What angle is a 4/12, 6/12, 8/12 or 12/12 roof?

A 4/12 roof is 18.43 degrees, a 6/12 roof is 26.57 degrees, an 8/12 roof is 33.69 degrees and a 12/12 roof is 45 degrees. The angle is the arctangent of the rise divided by 12.

What is a common roof pitch?

Most pitched house roofs fall between 4/12 and 9/12. Roofs below that are usually called low slope, and roofs above it are steep enough that crews often need extra safety gear.

What is the minimum roof pitch for shingles?

Most asphalt shingle makers set a 2/12 minimum, and slopes from 2/12 up to 4/12 usually call for extra underlayment. Your shingle maker's instructions and local code have the final say.

How many bundles of shingles do I need?

Divide the actual sloped roof area by 100 for squares, multiply by 3 bundles a square, add 10% for waste and round up. A 1,500 sq ft footprint at a 6/12 pitch is about 1,677 sq ft of roof, or 16.77 squares, which comes to 56 bundles. Some heavier shingles use more bundles a square, so confirm with your brand.

What is a roofing square?

A roofing square is 100 sq ft of actual (sloped) roof surface, the standard unit roofers and shingle makers price and measure by.

How do I convert square feet to roofing squares?

Take the roof's actual sloped area, not just its flat footprint, and divide by 100. If you only have the footprint, multiply it by the pitch multiplier first.

How does roof pitch affect square footage?

A steeper roof has more surface than its footprint suggests, because the surface is tilted. A 6/12 pitch multiplies flat area by about 1.118, and a 12/12 pitch by about 1.414.

How many roofing squares is a 2,000 sq ft roof?

If 2,000 sq ft is the actual sloped area, that's 20 squares. If it's the flat footprint, apply the pitch multiplier first: at a 6/12 pitch, 2,000 sq ft flat becomes about 2,236 sq ft actual, or roughly 22.4 squares.

How many bundles of shingles do I need for a 2,000 sq ft roof?

If 2,000 sq ft is the sloped roof area, that is 20 squares, or 66 bundles with 10% waste. If it is the flat footprint, the pitch adds area: 74 bundles at 6/12 and 80 at 8/12 (22.36 and 24.04 squares).

How many square feet does a bundle of shingles cover?

About 33.33 sq ft, since 3 bundles cover one 100 sq ft square. Some heavier shingles use more bundles a square, so check the coverage printed on the wrapper.

Does a hip roof need more shingles than a gable roof?

For the same footprint and pitch the surface area is the same, because every plane of a hip roof tilts at that pitch. A hip roof does need more cutting along each hip, plus extra cap shingles, so roofers raise the waste allowance from 10% to about 15%.

What if my roof has two different pitches?

Split it into sections and run each one at its own pitch, then add the squares. A 1,400 sq ft main roof at 6/12 and a 300 sq ft porch at 3/12 total 18.74 squares, or 62 bundles. Treating the whole 1,700 sq ft as 6/12 would ask for 63.

Are ridge cap and starter shingles included in the bundle count?

No. Both are bought by the linear foot: starter along every eave and rake edge, and ridge cap along every ridge and hip. Measure those runs and check the linear feet printed on the cap and starter bundles you plan to buy.

Is my roof footprint the same as my home's square footage?

Usually not. The footprint is the area the roof covers seen from above, including the eave overhangs and any garage or porch under the same roof. A two-story home's living area counts both floors, so it can be about twice its footprint. Measure around the outside walls and add the overhangs.

Limitations

This tool estimates material quantities from a single pitch and a simplified footprint — it doesn't account for hips, valleys, dormers or complex roof geometry, which increase both actual area and waste beyond this estimate. Confirm final material counts with a roofer for anything beyond a simple gable or shed roof.

Put this converter on your site

Run a site for suppliers, contractors or DIYers? You can embed the Shingle & Roofing Squares Calculator as a free widget — responsive, no registration, and nothing added to your page beyond the calculator itself.

Cite this converter

Referencing this converter in coursework, an article or a project write-up? Grab a citation in the format you need:

APA
MLA
Link (HTML)

Related converters